Transfer Case Two/Four Wheel Drive Actuator Position Sensor Replacement

Fig 1: Transfer Case Two/Four Wheel Drive Actuator Position Sensor

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure  Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
1	Two/Four Wheel Drive Actuator Position Sensor Bolt (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten  6 N.m (53 lb in)
2	Two/Four Wheel Drive Actuator Position Sensor
3	Two/Four Wheel Drive Actuator Position Sensor O-Ring Seal Procedure  Lightly lubricate the O-ring with clean transfer case fluid. Refer to Adhesives, Fluids, Lubricants, and Sealers .