LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2016 >> Suburban 3500 HD LT >> Repair and Diagnosis >> Transmission >> Transfer Case >> Transfer Case - Mp 3023/3024 (NQH) - Repair Instructions - On Vehicle >> Repair Instructions - On Vehicle >> Front Output Shaft Seal Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Front Output Shaft Oil Seal And Installer
    GM2716858Courtesy of GENERAL MOTORS COMPANY
  1. Using the J-8092  driver handle and DT-50649  installer (2) install the front output shaft oil seal (1) to the transfer case.
    2. Fig 2: Front Output Shaft Oil Slinger And Installer
    GM2716856Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    The new design front output shaft oil slinger can be installed onto all current and prior model year applications, providing the new design front output shaft seal is also installed. Refer to Transfer Case Description and Operation .

  2. Using the J-8092  driver handle and DT-50649  installer (2) install the front output shaft oil slinger (1) to the transfer case.
  3. Install the front propeller shaft. Refer to Front Axle Propeller Shaft Replacement (NQH)Front Axle Propeller Shaft Replacement (Heavy Duty) .
  4. Install the transfer case shield, if equipped. Refer to Transfer Case Shield Replacement .
  5. Lower the vehicle.
scientia non olet · About LEMON Manuals