Rear Output Shaft Bushing Replacement (Heavy Duty)

Fig 1: View Of Rear Output Shaft Bushing

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Ensure the bushing is installed squarely into the bushing bore.
1	Transfer Case Rear Output Shaft Bushing Procedure Press the bushing until the tool bottoms on the rear case half. Special Tools DT-48022 Output Bushing Installer DT-48209 Bushing Remover GE-8092 Driver Handle For equivalent regional tools, refer to Special Tools .

Callout

Component Name

Preliminary Procedure
Ensure the bushing is installed squarely into the bushing bore.

Transfer Case Rear Output Shaft Bushing
Procedure
Press the bushing until the tool bottoms on the rear case half.

Special Tools

For equivalent regional tools, refer to Special Tools .