Rear Seat Back Cushion Frame Replacement (Bucket)

Fig 1: Rear Seat Back Cushion Frame, Bolts & Buckle Assembly (Bucket)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the rear seat. Refer to Rear Seat Removal and Installation (Bucket) . Remove the rear seat back cover and pad. Refer to Rear Seat Back Cushion Cover and Pad Replacement (Bucket) .
1	Rear Seat Back Recliner Bolts (Qty: 4) CAUTION: Refer to Fastener Caution . Tighten 50 N.m (37 lb ft)
2	Rear Seat Belt Buckle Assembly Procedure Refer to Rear Seat Belt Buckle Replacement (Bucket) .
3	Rear Seat Back Cushion Frame Procedure Transfer components as necessary.