Circuit/System Verification
- Ignition ON.
- Verify the driver information center select, configuration, and back function changes when pressing the SELECT, CONFIG, and BACK switches.
- If the driver information center does not change
Refer to SELECT, CONFIG, and BACK Switch Malfunction
- If the driver information center changes
- If the driver information center does not change
- Verify the driver information center plus and minus functions change when activating the PLUS and MINUS switches.
- If the driver information center does not change
Refer to PLUS and MINUS Switch Malfunction
- If the driver information center changes
- If the driver information center does not change
- All OK.