Stabilizer Shaft Link Replacement

WARNING: This page is about a different car, the 2015 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Stabilizer Shaft Link And Nuts

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle . Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation . Disconnect any harnesses or retainers secured to the stabilizer shaft link. Note any attaching points to aid in installation.
1	Stabilizer Shaft Link Nut (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten 65 N.m (48 lb ft)
2	Stabilizer Shaft Link

Callout

Component Name

Preliminary Procedures

Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
Disconnect any harnesses or retainers secured to the stabilizer shaft link. Note any attaching points to aid in installation.

Stabilizer Shaft Link Nut (Qty: 2)

CAUTION: Refer to Fastener Caution .

Tighten
65 N.m (48 lb ft)

Stabilizer Shaft Link