LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2016 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Seat Hardware, Seat Trim, And Upholstery) >> Repair Instructions >> Rear Seat Back Bolster Replacement

Rear Seat Back Bolster Replacement

WARNING: This page is about a different car, the 2015 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Rear Seat Back Bolster
GM2569243Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
1 Rear Seat Back Cushion Bolster
WARNING: Refer to SIR Warning .

Procedure

  1. Disable the SIR system. Refer to SIR Disabling and Enabling
  2. Fold rear seat back cushion down.
  3. Pull the upper area of the seat back cushion bolster forward.
  4. Use a suitable flat-bladed tool to release the retainer from the bolster's retaining bar.
  5. Pull the seat back cushion bolster up to remove it from the rear seat.