LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2016 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 55 (Engine Mechanical - 2.0L (LTG) Or 2.5L (LKW) - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> Engine Front Cover Removal (LTG)

Engine Front Cover Removal (LTG)

WARNING: This page is about a different car, the 2015 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the accessory drive belt tensioner bolt (1).
    Fig 1: Accessory Drive Belt Tensioner
    GM2783782Courtesy of GENERAL MOTORS COMPANY
  2. Remove the accessory drive belt tensioner (2).
  3. Remove the engine front cover bolts (2-6, 8).
    Fig 2: Exploded View Of Engine Front Cover And Components
    GM2783783Courtesy of GENERAL MOTORS COMPANY
  4. Remove the engine front cover (1).
  5. Ensure proper use of room temperature vulcanizing (RTV) sealant. Refer to Use of Room Temperature Vulcanizing (RTV) and Anaerobic Sealant
  6. Clean and Inspect the engine front cover mating surface.
  7. Remove the front oil seal (7) with an appropriate tool.
scientia non olet · About LEMON Manuals