LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2016 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 55 (Engine Mechanical - 2.0L (LTG) Or 2.5L (LKW) - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> Crankshaft and Bearing Installation >> Crankshaft Installation

Crankshaft Installation

WARNING: This page is about a different car, the 2015 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the upper crankshaft bearings (1) and lubricate bearing surfaces with engine oil.
    Fig 1: Crankshaft Upper Bearings
    GM2742527Courtesy of GENERAL MOTORS COMPANY
    NOTE: Crankshaft bearings MUST be separated, marked or organized in a way to ensure installation to their original location and position, when suitable for use.
  2. Install the crankshaft upper thrust bearing (3) and lubricate bearing surfaces with engine oil.
  3. Install the crankshaft (1) on the journals.
    Fig 2: Crankshaft
    GM2743541Courtesy of GENERAL MOTORS COMPANY
scientia non olet · About LEMON Manuals