Balancer Shaft with Oil Pump Installation

WARNING: This page is about a different car, the 2015 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

Install the balancer and oil pump shaft assembly (2).

Fig 1: Balancer And Oil Pump Shaft Assembly Bolts
Courtesy of GENERAL MOTORS COMPANY
Install the balancer and oil pump shaft assembly bolts (1) finger tight.
Tighten the bolts twice in sequence:

Fig 2: Bolts Twice In Sequence
Courtesy of GENERAL MOTORS COMPANY
1. Tighten the bolts a first pass in sequence to 58 N.m (43 lb ft).
2. Tighten the bolts a final pass in sequence to 58 N.m (43 lb ft).