Heater Inlet Hose Replacement (LTG)

WARNING: This page is about a different car, the 2015 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Heater Inlet Hose (LTG)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Drain the cooling system. Refer to Cooling System Draining and Filling (GE 47716) and Cooling System Draining and Filling (Static) . Remove the engine control module. Refer to Engine Control Module Replacement (LTG) .
1	Heater Inlet Hose Quick Connect Retainer
2	Heater Inlet Hose Clamp Procedure Reposition the heater inlet hose clamp using the BO-38185 hose clamp pliers. Special Tools BO-38185 Hose Clamp Pliers For equivalent regional tools. Refer to Special Tools .
3	Heater Inlet Hose Procedure Fill the cooling system to the proper level. Refer to Cooling System Draining and Filling (GE 47716) and Cooling System Draining and Filling (Static) . Inspect the cooling system for leaks. Refer to Cooling System Leak Testing .