Radiator Surge Tank Inlet Hose Replacement (LTG)

WARNING: This page is about a different car, the 2015 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Radiator Surge Tank Inlet Hose (LTG)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Drain the cooling system. Refer to Cooling System Draining and Filling (GE 47716) and Cooling System Draining and Filling (Static) . Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement (LTG) .
1	Radiator Surge Tank Inlet Hose Clamp (Qty: 2) Special Tools BO-38185 Hose Clamp Pliers For equivalent regional tools, refer to Special Tools .
2	Radiator Surge Tank Inlet Hose Procedure Remove the radiator surge tank inlet hose retaining clips from the fuel feed front pipe. After installation, fill the coolant reservoir to the proper level. Refer to Cooling System Draining and Filling (GE 47716) and Cooling System Draining and Filling (Static) Inspect cooling system for leaks.

Callout

Component Name

Preliminary Procedures

Drain the cooling system. Refer to Cooling System Draining and Filling (GE 47716) and Cooling System Draining and Filling (Static) .
Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement (LTG) .

Radiator Surge Tank Inlet Hose Clamp (Qty: 2)
Special Tools
BO-38185 Hose Clamp Pliers
For equivalent regional tools, refer to Special Tools .

Radiator Surge Tank Inlet Hose

Procedure

Remove the radiator surge tank inlet hose retaining clips from the fuel feed front pipe.
After installation, fill the coolant reservoir to the proper level. Refer to Cooling System Draining and Filling (GE 47716) and Cooling System Draining and Filling (Static)
Inspect cooling system for leaks.