LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2016 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Engine Mechanical - 2.0L (LTG) Or 2.5L (LKW) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Positive Crankcase Ventilation Hose/Pipe/Tube Replacement (LTG/Valve with Pipe Tamper Proof) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2015 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the PCV hose assembly and PCV valves (3).
    Fig 1: PCV Valve Bolt
    GM3962776Courtesy of GENERAL MOTORS COMPANY
  2. Install the PCV valve fasteners (1) and tighten to 10 N.m (89 lb in).
    CAUTION: Refer to Fastener Caution .
  3. Install the PCV hose fastener (2) and tighten to 12 N.m (106 lb in).
  4. Intake Manifold Cover Replacement (LTG) »Install
scientia non olet · About LEMON Manuals