LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2016 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Engine Mechanical - 2.0L (LTG) Or 2.5L (LKW) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Intake Valve Rocker Arm Replacement (LTG) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2015 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the camshaft position actuator and camshaft - intake. Refer to Camshaft Position Actuator and Camshaft Replacement - Intake (LTG) .
  2. Remove the intake rocker arm (1).
    Fig 1: Intake Rocker Arm
    GM2963895Courtesy of GENERAL MOTORS COMPANY
    NOTE: Keep all of the valve rocker arms and hydraulic lash adjusters in order so that they can be reinstalled in their respective locations.
scientia non olet · About LEMON Manuals