Removal Procedure

WARNING: This page is about a different car, the 2015 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

Remove the lower oil pan. Refer to Lower Oil Pan Replacement .
Disconnect the oil level sensor electrical connector.
Remove the engine oil level sensor C-clip (1).

Fig 1: Engine Oil Level Sensor C-clip
Courtesy of GENERAL MOTORS COMPANY
Remove the engine oil level sensor fasteners (1).

Fig 2: Engine Oil Level Sensor Fasteners
Courtesy of GENERAL MOTORS COMPANY
Remove the engine oil level sensor (1) from the oil pan.

Fig 3: O-ring Around Level Sensor
Courtesy of GENERAL MOTORS COMPANY

NOTE: Replace the O-ring around the level sensor.