LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2016 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Engine Mechanical - 2.0L (LTG) Or 2.5L (LKW) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Engine Oil Cooler Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2015 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the engine oil filter. Refer to Engine Oil and Oil Filter Replacement .
  2. Remove the engine oil cooler fastener (1).
    Fig 1: Engine Oil Cooler Fastener
    GM2874855Courtesy of GENERAL MOTORS COMPANY
  3. Remove the engine oil cooler hose (1) and (2).
    Fig 2: Engine Oil Cooler Connector
    GM2874857Courtesy of GENERAL MOTORS COMPANY
  4. Remove the engine oil cooler connector (3).
  5. Remove the engine oil cooler (1).
    Fig 3: Engine Oil Cooler
    GM2874859Courtesy of GENERAL MOTORS COMPANY
    NOTE: DISCARD the old engine oil cooler seal.
scientia non olet · About LEMON Manuals