LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2016 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Engine Mechanical - 2.0L (LTG) Or 2.5L (LKW) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Crankshaft Rear Oil Seal Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2015 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the automatic transmission flex plate. Refer to Automatic Transmission Flex Plate Replacement .
  2. Use a suitable tool to remove the crankshaft rear oil seal (1).
    Fig 1: Crankshaft Rear Oil Seal
    GM2812543Courtesy of GENERAL MOTORS COMPANY
    NOTE: Do not damage the outside diameter of the crankshaft or chamber with any tool.
scientia non olet · About LEMON Manuals