Removal Procedure

WARNING: This page is about a different car, the 2015 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

Remove the timing chain. Refer to Camshaft Timing Chain and Tensioner Replacement .
Remove and DISCARD the bolt (1) and remove the actuator (2).

Fig 1: Camshaft Position Intake Actuator & Bolt (LKW)
Courtesy of GENERAL MOTORS COMPANY
NOTE:
- Install an open-end wrench to the camshaft flats located on the intake camshaft.
- While holding the open-face wrench steady loosen the camshaft actuator bolt.