LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2016 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Engine Mechanical - 2.0L (LTG) Or 2.5L (LKW) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Balancer Shaft with Oil Pump Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2015 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Oil Pan Replacement »Remove
  2. Timing Chain Crankshaft Sprocket Replacement »Remove
  3. Balancer Shaft with Oil Pump Bolt (1)»Remove [8x]
    Fig 1: Balancer Shaft with Oil Pump
    GM4176256Courtesy of GENERAL MOTORS COMPANY
  4. Balancer Shaft with Oil Pump (2)»Remove
  5. Remove the oil pump. Refer to Balancer Shaft with Oil Pump Disassemble
    NOTE: If replacing the oil pump, remove it from the balancer shaft.