Removal Procedure
- Disconnect Battery Negative Cable Disconnection and Connection (with KL9)Battery Negative Cable Disconnection and Connection (without KL9)
Courtesy of GENERAL MOTORS COMPANY
- Disconnect the turbocharger wastegate regulator solenoid valve electrical connector (8) from the turbocharger wastegate regulator solenoid valve (5).
- Remove and DISCARD the 3 turbocharger wastegate regulator solenoid valve hose clamps (2, 4, 6).
- Remove the 3 turbocharger wastegate regulator solenoid valve hoses (1, 3, 7) from the turbocharger wastegate regulator solenoid valve (5).
Courtesy of GENERAL MOTORS COMPANY
- Remove the turbocharger wastegate regulator solenoid valve bolt (2).
- Remove the turbocharger wastegate regulator solenoid valve (1).