LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2016 >> Malibu LS >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Engine Controls And Fuel - 1.5L (LFV) - Repair Instructions >> Repair Instructions >> Turbocharger Wastegate Actuator Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Turbocharger Wastegate Actuator
    GM4233600Courtesy of GENERAL MOTORS COMPANY
  1. Install Turbocharger Wastegate Actuator (4)
    2. CAUTION:

    Refer to Fastener Caution .

  2. Install Turbocharger Wastegate Actuator Fastener (3) (Qty: 2) to 10 N.m (89 lb in)
  3. Loosely install Hose Clamp (1) at Vacuum Hose (2)
  4. Connect Vacuum Hose (2)
  5. Secure the hose with the hose clamp.
    6. Fig 2: Clip
    GM4233559Courtesy of GENERAL MOTORS COMPANY
  6. Install Clip (1)
  7. Install Turbocharger Heat Shield Replacement
scientia non olet · About LEMON Manuals