LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2016 >> Malibu LS >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Engine Controls And Fuel - 1.5L (LFV) - Repair Instructions >> Repair Instructions >> Fuel Injector Wiring Harness Replacement >> Removal Procedure

Removal Procedure

  1. Remove Fuel Injection Fuel Rail Assembly Replacement 
    2. Fig 1: Fuel Injector Wiring Harness
    GM3982086Courtesy of GENERAL MOTORS COMPANY
  2. Disconnect the fuel injection fuel rail fuel pressure sensor wiring harness plug (1).
  3. Cut the cable tie (2).
  4. Unclip the fuel injector wiring harness (3) from the fuel rail.
    5. Fig 2: Fuel Injector
    GM3982080Courtesy of GENERAL MOTORS COMPANY
  5. Disconnect Electrical Connector (2) at Fuel Injector (3)
  6. Cut the cable tie (1)
scientia non olet · About LEMON Manuals