LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2016 >> Malibu LS >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Engine Controls And Fuel - 1.5L (LFV) - Repair Instructions >> Repair Instructions >> Evaporative Emission Pipe Replacement (Engine to Tank) >> Installation Procedure

Installation Procedure

    Fig 1: Evaporative Emission Pipe
    GM4244445Courtesy of GENERAL MOTORS COMPANY
  1. Install Evaporative Emission Pipe (1) at Retainer (3) (Qty: 6)
  2. Connect Evaporative Emission Pipe (1) at Evaporative Emission Canister Purge Pipe (2) - Plastic Collar Quick Connect Fitting Service 
    3. Fig 2: Evaporative Emission Pipe Retainers
    GM4244607Courtesy of GENERAL MOTORS COMPANY
  3. Install Evaporative Emission Pipe (1) at Retainer (2) (Qty: 5)
    4. Fig 3: Brake and Fuel Pipe Shield
    GM4244586Courtesy of GENERAL MOTORS COMPANY
  4. Install Brake and Fuel Pipe Shield (1)
  5. Install Front Cradle Brace - Right Side - Front Cradle Brace Replacement
  6. Install Evaporative Emission Canister Purge Tube Replacement (Intake Manifold to Purge Solenoid Valve) Evaporative Emission Canister Purge Tube Replacement (Purge Solenoid Valve to Evaporative Emission Front Pipe) 
scientia non olet · About LEMON Manuals