Rear Seat Back Bolster Replacement

Fig 1: Rear Seat Back Bolster - Right Side

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
WARNING: Refer to SIR Warning in the Preface section. Preliminary Procedures SIR Disabling and Enabling Rear Seat Cushion Removal and Installation
1	Rear Seat Back Bolster Bolt CAUTION: Fastener Caution Tighten 2.5 N.m (22 lb in)
2	Rear Seat Back Bolster Clip Procedure Use a flat bladed plastic tool to remove.
3	Rear Seat Back Bolster Bracket Procedure Loosen the rear seat back bolster lower guides. Slide out the rear seat back bolster bracket.
4	Rear Seat Back Bolster Procedure Disconnect the electrical connector.