Front Bumper Fascia Opening Lower Cover Replacement

Fig 1: Front Bumper Fascia Opening Lower Cover

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle . Remove the front compartment front center insulator, if equipped. Refer to Front Compartment Front Center Insulator Replacement .
1	Front Bumper Fascia Opening Lower Cover Push-In Retainer (Qty: 4)
2	Front Bumper Fascia Opening Lower Cover Screw (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten 2.5 N.m (22 lb in)
3	Front Bumper Fascia Opening Lower Cover Bolt (Qty: 2) Tighten 9 N.m (80 lb in)
4	Front Bumper Fascia Opening Lower Cover Bolt (Qty: 6) Tighten 2.5 N.m (22 lb in)
5	Front Bumper Fascia Opening Lower Cover Procedure Transfer parts as needed.