Steering Column Shroud Replacement (RPO N37)
| Callout | Component Name |
|---|---|
| Preliminary Procedure Remove the instrument panel knee bolster. Refer to Instrument Panel Knee Bolster Replacement (Chevrolet / GMC)Instrument Panel Knee Bolster Replacement (Cadillac) . |
|
| 1 | Steering Column Tilt Wheel Release Lever Refer to Steering Column Tilt Wheel Release Lever Replacement . |
| 2 | Steering Column Shroud - Upper Procedure Use a flat bladed plastic trim tool in order to release the tabs securing the upper shroud cover to the lower shroud cover. |
| 3 | Steering Column Shroud - Lower |
| 4 | Steering Column Shroud Bolt (Qty: 4)
CAUTION:
Refer to Fastener Caution . Tighten 2.5 N.m (22 lb in) |
| 5 | Steering Column Shroud - Lower Closeout |
| 6 | Steering Column Shroud - Upper Closeout Procedure Use a flat bladed plastic trim tool in order to release the tabs securing the upper shroud closeout to the lower shroud closeout. |