Underhood Electrical Center or Junction Block Bracket Replacement

Fig 1: View Of Underhood Electrical Center/Junction Block Bracket & Screws

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure  Remove the underhood electrical center junction block. Refer to Underhood Electrical Center or Junction Block Replacement .
1	Underhood Electrical Center Junction Block Bolt (Qty: 3) CAUTION: Refer to Fastener Caution . Tighten  9 N.m (80 lb in)
2	Underhood Electrical Center Junction Block Procedure  Unclip and reposition wiring harnesses and connectors from the junction block bracket as necessary.