Hood Replacement

Fig 1: View Of Hood & Bolts

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
WARNING: When a hood hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury. Preliminary Procedure Remove the air inlet grille panel extension. Refer to Air Inlet Grille Panel Extension Replacement .
1	Hood Hinge Bolt (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten 22 N.m (16 lb ft)
2	Hood Hinge Pivot Bolt (Qty: 2) Tighten 25 N.m (18 lb ft)
3	Hood Procedure Disconnect any electrical connectors before removing. With the aid of an assistant remove the hood. Transfer any parts as needed. Adjust the hood as needed. Refer to Hood Adjustment (Chevrolet) Hood Adjustment (GMC) Hood Adjustment (Cadillac)