Windshield Wiper Arm Replacement
| Callout | Component Name |
|---|---|
| 1 | Windshield Wiper Arm Finish Cap Procedure Use a small-flat bladed tool to remove windshield wiper arm finish cap. |
| 2 | Windshield Wiper Arm Nut (Qty: 2)
CAUTION:
Refer to Fastener Caution
. Tighten 24 N.m (18 lb in) |
| 3 | Windshield Wiper Arm Washer (Qty: 2) |
| 4 | Windshield Wiper Arm Procedure
NOTE:
Use a windshield wiper arm puller if the arm fails to release from the wiper motor pivot shaft.
|