Rear Compartment Lid Adjustment

Procedure

1. Loosen the rear compartment lid hinge bolt (Qty: 4) to adjust the rear compartment lid.
2. Adjust the rear compartment lid in order to obtain an even gap between the rear compartment lid and the quarter outer panel, the rear lamp and the rear bumper fascia and so that the rear compartment lid is flush with the quarter outer panel, the rear lamp and the rear bumper fascia.

Adjustment

• Align the rear compartment lid in order to achieve an equal gap of 2.25 to 3.75 mm around the rear compartment lid to the rear quarter panels (a).
• Align the rear compartment lid in order to achieve an equal gap of 5 to 7 mm from the rear compartment lid to the rear bumper fascia (b).