Tail Lamp Replacement (Inboard)

Fig 1: Tail Lamp (Inboard)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the rear compartment lid carpet. Refer to Rear Compartment Lid Carpet Replacement .
1	Tail Lamp Nut (Qty: 2) CAUTION: Refer to Fastener Caution .
2	Tail Lamp Mounting Bracket (Qty: 2)
3	Tail Lamp-Inboard Procedure Disconnect the electrical connector. Pull outboard to release tail lamp retaining tabs and remove from rear compartment lid.