Battery Tray Replacement

Fig 1: Battery Tray & Fasteners

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Battery Replacement Engine Control Module Replacement (LKW) and Engine Control Module Replacement (LTG)
1	Battery Tray Bolt (Qty: 3) CAUTION: Refer to Fastener Caution . Tighten 20 N.m (15 lb ft)
2	Battery Tray TIP: Unclip harnesses as necessary.

Callout

Component Name

Preliminary Procedure

Battery Tray Bolt (Qty: 3)

CAUTION: Refer to Fastener Caution .

Tighten
20 N.m (15 lb ft)

Battery Tray
TIP: Unclip harnesses as necessary.