Lubricate and install the hydraulic valve lash adjusters (1) into their bores in the cylinder head. Refer to Adhesives, Fluids, Lubricants and Sealers (LKW)
and Adhesives, Fluids, Lubricants and Sealers (LTG)
.
Courtesy of GENERAL MOTORS COMPANY
NOTE:
Pre-fill the low pressure chamber with engine oil. Maintain a vertical orientation of the assembly to retain the oil in the reservoir and high pressure chamber. Do not install the lash adjusters without pre-filling the low pressure chamber. Apply engine oil to the outer diameter surface of all adjusters.