LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Malibu LS >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 2.0L (LTG) Or 2.5L (LKW) - Repair Instructions - On Vehicle >> Repair Instructions - On Vehicle >> Crankshaft Rear Oil Seal Replacement >> Removal Procedure

Removal Procedure

  1. Remove the automatic transmission flex plate. Refer to Automatic Transmission Flex Plate Replacement .
  2. Use a suitable tool to remove the crankshaft rear oil seal (1).
    Fig 1: Crankshaft Rear Oil Seal
    GM2812543Courtesy of GENERAL MOTORS COMPANY
    NOTE: Do not damage the outside diameter of the crankshaft or chamber with any tool.
scientia non olet · About LEMON Manuals