Camshaft Cover Heat Shield Replacement

Fig 1: Camshaft Cover Heat Shield

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure  Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement (LKW)  and Intake Manifold Cover Replacement (LTG) .
1	Camshaft Heat Shield Cover Fastener (Qty: 4) CAUTION: Refer to Fastener Caution . Tighten  10 N.m (89 lb in)
2	Camshaft Heat Shield Cover Procedure  Unclip and reposition the wire harness retainer from the camshaft cover heat shield.