Engine Front Cover Removal (LTG)
- Remove the accessory drive belt tensioner bolt (1).
Courtesy of GENERAL MOTORS COMPANY
- Remove the accessory drive belt tensioner (2).
- Remove the engine front cover bolts (2-6, 8).
Courtesy of GENERAL MOTORS COMPANY
- Remove the engine front cover (1).
- Ensure proper use of room temperature vulcanizing (RTV) sealant. Refer to Use of Room Temperature Vulcanizing (RTV) and Anaerobic Sealant
- Clean and Inspect the engine front cover mating surface.
- Remove the front oil seal (7) with an appropriate tool.