LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Malibu LS >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 2.0L (LTG) Or 2.5L (LKW) - Repair Instructions - Off Vehicle >> Repair Instructions - Off Vehicle >> Balancer Shaft with Oil Pump Removal

Balancer Shaft with Oil Pump Removal

  1. Remove the 8 balancer and oil pump shaft assembly bolts (1) along the perimeter of the assembly.
    Fig 1: Balancer And Oil Pump Shaft Assembly Bolts
    GM2742574Courtesy of GENERAL MOTORS COMPANY
    NOTE: DO NOT remove or loosen the balancer assembly bolts that join the two halves of the assembly together. Identify the bolts that retain the balancer assembly to the lower crankcase and ensure only these bolts are removed.
  2. Remove the balancer and oil pump shaft assembly (2).
scientia non olet · About LEMON Manuals