LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Malibu LS >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 2.0L (LTG) Or 2.5L (LKW) - Repair Instructions - Off Vehicle >> Repair Instructions - Off Vehicle >> Balancer Shaft with Oil Pump Installation

Balancer Shaft with Oil Pump Installation

  1. Install the balancer and oil pump shaft assembly (2).
    Fig 1: Balancer And Oil Pump Shaft Assembly Bolts
    GM2742574Courtesy of GENERAL MOTORS COMPANY
  2. Install the balancer and oil pump shaft assembly bolts (1) finger tight.
  3. Tighten the bolts twice in sequence:
    Fig 2: Bolts Twice In Sequence
    GM2743543Courtesy of GENERAL MOTORS COMPANY
    1. Tighten the bolts a first pass in sequence to 58 N.m (43 lb ft).
    2. Tighten the bolts a final pass in sequence to 58 N.m (43 lb ft).
scientia non olet · About LEMON Manuals