LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Malibu LS >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Engine Controls And Fuel - 2.0L (LTG) Or 2.5L (LKW) - Repair Instructions >> Repair Instructions >> Fuel Feed Pipe Replacement (Engine to Chassis LTG) >> Removal Procedure

Removal Procedure

  1. Relieve the system fuel pressure. Refer to Fuel Pressure Relief .
    WARNING: Refer to Gasoline/Gasoline Vapors Warning .
    WARNING: Refer to Safety Glasses Warning .
  2. Remove the fuel feed front pipe. Refer to Fuel Feed Front Pipe Replacement (LTG) .
  3. Remove the fuel feed pipe (1) from the retainers (2).
    Fig 1: Fuel Feed Pipe
    GM2868543Courtesy of GENERAL MOTORS COMPANY
  4. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  5. Disconnect the fuel pressure sensor electrical connector.
  6. Disconnect the fuel feed pipe (1) and remove from retainers (2). Refer to Plastic Collar Quick Connect Fitting Service .
    Fig 2: Fuel Feed Pipe And Retainers
    GM2820662Courtesy of GENERAL MOTORS COMPANY
  7. Remove the fuel feed pipe (1) from the vehicle.
scientia non olet · About LEMON Manuals