Installation Procedure

Install the fuel feed pipe (1) to the vehicle.

Fig 1: Fuel Feed Pipe And Retainers
Courtesy of GENERAL MOTORS COMPANY
Connect the fuel feed pipe (1) and install to the retainers (2). Refer to Plastic Collar Quick Connect Fitting Service .
Connect the electrical connector to the fuel pressure sensor.
Lower the vehicle.
Install the fuel feed pipe (1) to the retainers (2).

Fig 2: Fuel Feed Pipe
Courtesy of GENERAL MOTORS COMPANY
Install the fuel feed front pipe. Refer to Fuel Feed Front Pipe Replacement (LTG) .
Cycle the ignition on to run the fuel pump and check for fuel leaks.