LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Malibu LS >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Engine Controls And Fuel - 2.0L (LTG) Or 2.5L (LKW) - Repair Instructions >> Repair Instructions >> Evaporative Emission Line Replacement - Engine to Chassis (LKW) >> Installation Procedure

Installation Procedure

  1. Install the evaporative emission pipe (1) to the vehicle.
    Fig 1: Evaporative Emission Pipe
    GM2820659Courtesy of GENERAL MOTORS COMPANY
  2. Connect the evaporative emission pipe (1) and install to the retainers (2). Refer to Plastic Collar Quick Connect Fitting Service .
  3. Lower the vehicle.
  4. Install the evaporative emission pipe (1) to the retainers (2).
    Fig 2: Evaporative Emission Pipe
    GM2815570Courtesy of GENERAL MOTORS COMPANY
  5. Install the evaporative emission front pipe. Refer to Evaporative Emission Front Pipe Replacement (LKW) .
scientia non olet · About LEMON Manuals