LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Malibu LS >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Engine Controls And Fuel - 2.0L (LTG) Or 2.5L (LKW) - Repair Instructions >> Repair Instructions >> Charge Air Cooler Inlet Air Tube Replacement (LTG) >> Installation Procedure

Installation Procedure

  1. Install the charge air cooler inlet air tube (2) to the vehicle.
    Fig 1: Release Clip
    GM2868588Courtesy of GENERAL MOTORS COMPANY
  2. Connect the charge air cooler inlet air hose (2) to the charge air cooler and engage the retaining clip (1).
  3. Install the charge air cooler inlet air tube bolts (1) to the charge air cooler inlet air tube (2) and tighten to 10 N.m (89 lb in).
    Fig 2: Charge Air Cooler Inlet Air Tube Bolts
    GM2868580Courtesy of GENERAL MOTORS COMPANY
  4. Lower the vehicle.
scientia non olet · About LEMON Manuals