X50A Fuse Block - Underhood X3

Connector Part Information

Harness Type: Engine
OEM Connector: 13732282
Service Connector: 13505902
Description: 50-Way F 1.5, 2.8 DSQ Metri-Pack 800 Series (BK)

Terminal Part Information

Terminal Type ID	Terminated Lead	Diagnostic Test Probe	Terminal Removal Tool	Service Terminal	Tray Name	Core Crimp	Insulation Crimp
I	13575774	J-35616-14 (GN)	J-38125-560	Not Available	Not Available	Not Available	Not Available
II	13575780	J-35616-35 (VT)	J-38125-36	Not Available	Not Available	Not Available	Not Available
III	13575781	J-35616-35 (VT)	J-38125-36	Not Available	Not Available	Not Available	Not Available
IV	13575860	J-35616-4A (PU)	J-38125-36	964280-2	Yazaki 15	E	C
V	13575860	J-35616-4A (PU)	J-38125-36	Not Available	Not Available	Not Available	Not Available
VI	Not Required	J-35616-35 (VT)	No Tool Required	Not Required	Not Required	Not Required	Not Required

Pin	Size	Color	Circuit	Function	Terminal Type ID	Option
1	2.5	VT/D-BU	5290	Powertrain Main Relay Fused Supply (1)	III	-
2	0.75	VT/D-BU	5291	Powertrain Main Relay Fused Supply (2)	V	-
3	-	-	-	Not Occupied	-	-
4	0.5	VT/BK	2139	Run/Crank Ignition 1 Voltage	IV	-
5	2.5	YE	6	Starter Solenoid Crank Ignition Voltage	III	0
6	0.75	VT/D-BU	5293	Powertrain Main Relay Fused Supply (4)	I	-
7	0.75	VT/D-BU	5294	Powertrain Main Relay Fused Supply (5)	I	-
8-9	-	-	-	Not Occupied	-	-
10	0.5	GY	5127	After Boil Heater Relay Control	I	KL9
11	0.5 0.5	YE /VT VT/GY	4325 6386	Starter Pinion Solenoid Relay Control Starter Enable Relay (PPEI 3) Control	I	KL9 0
12-14	-	-	-	Not Occupied	-	-
15	0.5	BN/YE	473	High Speed Cooling Fan Relay Control	I	-
16	0.5	YE/BL	5126	After Boil Heater Pump Control	I	KL9
17	0.5	YE	5991	Powertrain Relay Coil Control	I	-
18	0.5	L-GN/VT	335	Low Speed Cooling Fan Relay Control	I	-
19	0.5	VT/GN	439	Run/Crank Ignition 1 Voltage	I	KL9
20	0.5 0.5	VT/GY VT/L-GN	6386 439	Starter Enable Relay (PPEI 3) Control Run/Crank Ignition 1 Voltage	I	KL9 0
21	0.75	BK	2650	Ground	I	-
22	-	-	-	Not Occupied	-	-
23	2.5	YE/GN	4358	Starter Pinion Solenoid Voltage	III	KL9
24 - 25	-	-	-	Not Occupied	-	-
26	1	YE	6	Starter Solenoid Crank Ignition Voltage	VI	KL9
27	0.5	RD/BN	440	Battery Positive Voltage	II	-
28 - 31	-	-	-	Not Occupied	-	-
32	0.5	L-GN	380	A/C Refrigerant Pressure Sensor Signal	I	-
33	-	-	-	Not Occupied	-	-
34	0.5	WH/GY	459	A/C Compressor Clutch Relay Control	I	-
35	0.5	RD/BN	440	Battery Positive Voltage	I	-
36	-	-	-	Not Occupied	-	-
37	0.75	RD/L-GN	1840	Battery Positive Voltage	I	-
38	0.5	BN/RD	2700	A/C Pressure Sensor 5 Volt Reference	I	-
39	0.5	BK/BN	5514	A/C Refrigerant Pressure Sensor Low Reference	I	-
40 - 45	-	-	-	Not Occupied	-	-
46	0.5	BN/YE	473	High Speed Cooling Fan Relay Control	IV	-
47 - 49	-	-	-	Not Occupied	-	-
50	0.5	BN/L-GN	59	A/C Compressor Clutch Control	II	-