Front Bumper Shutter Replacement

Fig 1: Front Bumper Shutter

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement . Place the front bumper fascia down on a clean protected surface.
1	Front Bumper Shutter Lower Bolts (Qty: 3) CAUTION: Refer to Fastener Caution . Tighten 2.5 N.m (22 lb in)
2	Front Bumper Shutter Bolts (Qty: 4) Tighten 2.5 N.m (22 lb in)
3	Front Bumper Shutter