LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Malibu LS >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Exterior Trim >> Seat Hardware, Seat Trim, And Upholstery >> Repair Instructions >> Front Seat Back Cushion Cover Wire Replacement

Front Seat Back Cushion Cover Wire Replacement

Fig 1: Front Seat Back Cushion Cover Wire
GM2563811Courtesy of GENERAL MOTORS COMPANY
Callout Component Name

Preliminary Procedure

  1. Disable the SIR system. Refer to SIR Disabling and Enabling
    WARNING: Refer to SIR Warning .
  2. Remove the driver or passenger seat. Refer to Driver or Passenger Seat Removal and Installation .
  3. Remove the front seat back cushion pad. Refer to Front Seat Back Pad Replacement .
1 Front Seat Back Cushion Cover Wire

Procedure

  1. Disconnect the electrical connections to the lumbar pump and lumbar distributor.
  2. Pull outward on the bottom of the front seat back cushion wire to release the lower support wires from the seat frame.
  3. Pull side of front seat back cushion wire rearward and sideward to release the lower support wires.
  4. Pull side of front seat back cushion wire forward and sideward to release the upper support wires.
  5. Remove the front seat back cushion wire from the seat back frame.
scientia non olet · About LEMON Manuals