Front Side Door Auxiliary Weatherstrip Replacement

Fig 1: Front Side Door Weatherstrip - Body Side

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the center pillar lower trim panel. Refer to Center Pillar Lower Trim Panel Replacement .
1	Front Side Door Auxiliary Weatherstrip Procedure Start at the rear upper corner of the door opening and pull the weatherstrip away from the door opening flange. Position the weatherstrip in the upper corner of the center pillar. Working downward along the front edge, install the weatherstrip on the door opening flange ensuring that the carrier is fully seated in the corners. Using a rubber mallet, ensure that the weatherstrip is seated on the entire door opening flange.

Callout

Component Name

Preliminary Procedure
Remove the center pillar lower trim panel. Refer to Center Pillar Lower Trim Panel Replacement .

Front Side Door Auxiliary Weatherstrip

Procedure

Start at the rear upper corner of the door opening and pull the weatherstrip away from the door opening flange.
Position the weatherstrip in the upper corner of the center pillar.
Working downward along the front edge, install the weatherstrip on the door opening flange ensuring that the carrier is fully seated in the corners.
Using a rubber mallet, ensure that the weatherstrip is seated on the entire door opening flange.