LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LTZ >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Engine Controls And Fuel - 1.4L (LUJ, LUV) - Repair Instructions >> Repair Instructions >> Q38 Throttle Body: Throttle/Idle Learn >> Throttle Learn >> Scan Tool Idle Learn or Idle Learn Reset Procedure - Performed after the throttle body is cleaned or replaced

Scan Tool Idle Learn or Idle Learn Reset Procedure - Performed after the throttle body is cleaned or replaced

  1. Ignition ON, engine OFF, perform the Idle Learn or Idle Learn Reset in Configuration/Reset or Module Setup.
  2. Engine idling, verify the scan tool Throttle Body Idle Airflow Compensation value is equal 0% and the engine is idling at a normal idle speed.
  3. Clear the DTCs and return to the diagnostic that referred you here.
scientia non olet · About LEMON Manuals