LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> Transmission >> Manual Transmission Clutch >> Repair Instructions >> Clutch Pedal Position Sensor Replacement >> Installation Procedure

Installation Procedure

  1. Install the clutch pedal position sensor (1).
    Fig 1: Clutch Pedal Position Sensor And Bolt
    GM2028127Courtesy of GENERAL MOTORS COMPANY
  2. Install the clutch pedal position sensor bolt (2) and tighten to 3 N.m (27 lb in).
    CAUTION: Refer to Fastener Caution .
  3. Connect the clutch pedal position sensor wiring harness plug.
  4. Learn clutch pedal position sensor, refer to Clutch Pedal Position Sensor Learn .
scientia non olet · About LEMON Manuals