Installation Procedure

Clean the 3 clutch actuator cylinder bolt threads in clutch housing.
Clutch Actuator Cylinder (1) »Install

Fig 1: Clutch Actuator Cylinder, Bolts And Seal
Courtesy of GENERAL MOTORS COMPANY

WARNING: Refer to Clutch Actuator Cylinder Warning .

CAUTION: Refer to Clutch Actuator Cylinder and Seal Caution .
Install 3 NEW clutch actuator cylinder bolts (2) and hand tighten them equally.
CAUTION: Refer to Fastener Caution .
Tighten the 3 clutch actuator cylinder bolts to 6 N.m (53 lb in).
Install the clutch actuator cylinder pipe (2) to the clutch actuator cylinder pipe sleeve (1).

Fig 2: Clutch Actuator Cylinder Pipe And Clutch Actuator Cylinder Pipe Sleeve
Courtesy of GENERAL MOTORS COMPANY
Clutch Actuator Cylinder Pipe Elbow (3) »Install

Fig 3: Clutch Actuator Cylinder Pipe Sleeve And Elbow
Courtesy of GENERAL MOTORS COMPANY
Clutch Actuator Cylinder Pipe Elbow Retainer (2) »Install
Transmission Replacement »Install