Removal Procedure

Remove battery tray. Refer to Battery Tray Replacement .
Remove radiator surge tank clip (2).

Fig 1: View Of Radiator Surge Tank And Radiator Surge Tank Clip
Courtesy of GENERAL MOTORS COMPANY
Remove radiator surge tank (1) and lay aside.
Place basin underneath.
Clip clutch actuator cylinder front pipe (2) out of 2 retainers.

Fig 2: Clutch Actuator Cylinder Front Pipe And Retainers
Courtesy of GENERAL MOTORS COMPANY
Open retaining clip (1).
Disconnect clutch actuator cylinder front pipe from clutch actuator cylinder pipe elbow.
Remove 2 brake pressure modulator valve bracket bolts (1).

Fig 3: Brake Pressure Modulator Valve Bracket Bolts
Courtesy of GENERAL MOTORS COMPANY
Open retaining clip (arrow).

Fig 4: Clutch Actuator Cylinder Front Pipe And Retaining Clip
Courtesy of GENERAL MOTORS COMPANY
Disconnect clutch actuator cylinder front pipe (1) from clutch master cylinder.
Remove clutch actuator cylinder front pipe.
NOTE: For removal of clutch actuator cylinder front pipe lift brake pressure modulator valve bracket carefully.